The flat soft technical information agent name G-07A (soft surface) Viscosity 7000-7500CPS transparent appearance proportion of 1.12 hardener name G-07B (soft surface) viscosity 400-500CPS transparent appearance with the proportion of 0.8 to 3 to 1 (weight ratio) the principal purpose for badges, handicrafts, electronic components and other surface perfusion, the major specialty elastomer coated, gloss, excellent foaming resistance, transparency, good use of time (100g × 25 ℃) 50 分钟 initial hardening 8 hours (50 ℃ × 4 小时 60 ℃ × 2 hours) followed by hardening material properties of strength 60 (kg / cm 2) bending strength 90 (kg / cm 2) on the deflection does not break off heat distortion temperature of 78 ℃ hardness (SHORED ) 28 - 36 motor characteristic surface impedance of 1 × 1015 (Ω/cm2) volume resistance 5 × 1015 (Ω/cm2) dielectric constant voltage of 22kv destroyed more than 4.7 (kv/mm2) Note: G-07AB plane soft at room temperature 25 ℃ below the hardening time will be extended, such as to shorten the curing time, the temperature must be 40-60 ℃ bake 4-5 hours. While G-07AB plane will produce soft in the mix in the temperature around 58 ℃, please rational use. Welcome patrons, contact us!